Ott ecoLog 1000, Measuring Range 0-4 m (0-13 ft) with 26 Ah Battery
Product Number: 5545000190-4UMeasurement Range EU
Conductivity
Overview
The Ott ecoLog 1000 is a self-contained, robust surface and groundwater level logger for measuring water level, temperature, and conductivity. It provides reliable system up-time and accurate measurements while avoiding data gaps. It’s simple to operate using just a smart phone or PC via integrated Bluetooth Low Energy (BLE) - no additional tools for maintenance or battery replacement. It supports smart phones, tablets, and PCs operating with Android, iOS, or Windows 10.
An Ott ecoLog 1000 variant is available with an optional conductivity sensor. Monitor water quality conditions at your measuring site to gain awareness of not only your water’s temperature but the chemical make up as well. Easily calibrate the conductivity cell, view measurement data, and perform diagnostics from your mobile device with the LinkComm Operating Software application.
Benefits
The ecoLog 1000 is an all-in-one instrument with a water level sensor, logger, and modem built-in. It requires no additional tools for maintenance or battery replacement. Installation and maintenance become easy with no need for additional cables or dongles. This minimizes your total cost of ownership and guarantees you won’t spend unnecessary time or energy setting up or relearning your equipment.
Gain a better understanding of water quality at your site by measuring temperature and conductivity with a rugged and accurate, 4-electrode conductivity measuring cell. This addition enables conductivity derived parameters such as Total Dissolved Solids (TDS) and salinity.
The ecoLog 1000 has reliable system up-time and accurate measurements in every data transmission. This wealth of continuous data, sent through either HTTP(S), MQTT(S), FTP(S), or SMS keeps you better informed before field visits, so each future visit is faster and more efficient. Additionally, configure and monitor your data completely remotely with cellular communication.
The logger is simple to operate using just a smart phone or PC via integrated Bluetooth Low Energy (BLE). It integrates with LinkComm software which allows for remote configuration and diagnostics of your station.
Specifications
Technical Attributes
| Accuracy | ±0.05 % FS (linearity and hysteresis) |
| Antenna | SMA connector with Penta Stubby Antenna / BLE built in Chip Antenna |
| Battery Life | |
| Certifications | Verizon Open Development Certification, AT&T IoT Device Certification |
| Clock Accuracy | ± 26 s / month (at 77 °F) / |
| Communication | Bluetooth Low Energy (BLE) 5.0 - up to 10 m (free line of sight) |
| Conductivity | No |
| Data output interval | 1 min ... 1/week, 15 min ... 1/week for SMS |
| Dimensions (free text) | Logger unit: LxD: 20.7 x 2.0 inch (525 x 50 mm (2"))
Pressure probe: LxD: 7.7 x 0.9 inch (195 x 22 mm ( |
| Environmental conditions: temperature | Operating: -22 °F ... +185 °F (-30 °C ... +85 °C) Storage: -40 °F ... +185 °F (-40 °C ... +85 °C) |
| Humidity | 5% ... 95 % (non-condensing) |
| Interface | Cellular network LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B9, B10, B12, B13, B17, B18, B19, B20, B25, B26, B27, B28, B66 |
| IP Rating | Logger Unit: IP67 (flood-proof up to 1 week / 1 m water column) Pressure Probe: IP68 |
| Material enclosures | Pressure probe housing: Stainless steel 1.4539 (904L) Logger housing: Aluminum / POM Cable jacket: PUR |
| Measurement Range EU | 0-13 ft (0-4 m) |
| Memory | 28 MB |
| Number of Measured Values | Up to 1,000,000 values |
| Power supply | 3.6 V / 26 Ah - Lithium power pack with connector |
| Pressure Sensor/Range | Ceramic / temperature compensated |
| Protocol | FTP, FTPS, HTTP, HTTPS (TLS 1.2), MQTT, MQTTS |
| Regulatory | FCC / IC / CE PTCRB: According to NAPRD03 |
| Resolution | 0.01 ft / 0.1 inch / 0.001 psi (0.001 m / 0.1 cm / 0.0001 bar) |
| Stability | Long-term stability (linearity + hysteresis): ± 0.1 %/a full scale |
| Storage Interval | 5 s - 24 h |
| Temperature Accuracy | ±0.2 °F (±0.1 °C) |
| Temperature range | -13 - +158 °F (-25 - +70 °C) |
| Temperature resolution | 0.02 °F (0.01 °C) |
| Weight EU | Logger unit incl. battery pack: ~ 31.7 oz (~ 900 g) Pressure probe: ~ 23.6 oz (~ 670 g) Pressure probe cable: ~ 1.48 oz/m (~ 42 g/m) |
Resources
Data Sheets (4)
Manuals (5)
Brochures (4)
Application Notes (1)
Software/Firmware (4)
Guides (1)
Methods/Procedures (2)
Videos
LINKCOMM
LinkComm Software